Mindray MEC1000 Patient Monitor Parts Display Assembly LB104S 6091L-0391A

Mindray MEC-1000 Monitor Display 

Mindray MEC1000 Patient Monitor Parts Display Assembly LB104S 6091L-0391A

► Brief Description

Mindray MEC-1000 Monitor Display - It is a very important component of the MEC1000 Patient Monitor. Its main function is to display the patient's physiological data detected by the monitor (specifically including ECG, RESP., NIBP, SpO2 and TEMP). Physiological signals) are converted into more specific digital signals, waveforms or values for users to view. This information is presented on the monitor screen in a more vivid form, allowing medical staff to work more efficiently. The Mindray MEC-1000 Monitor Display can also display the normal operation interface, which is usually operated through the buttons on the front panel.

► Specification

► More Details

The Mindray MEC1000 Patient Monitor Parts Display Assembly LB104S 6091L-0391A is the main output interface on the monitor. It can not only display patient data and waveforms in real time, but also record and save these data. It can also be reminded at all times through preset alarm values. Whether the user has any abnormality. Once the preset value is exceeded, a corresponding alarm will be issued on the screen to remind the user.

► NOTE

If the Mindray MEC1000 Patient Monitor Parts Display Assembly LB104S 6091L-0391A display screen is white or blurred, it may be caused by the following conditions:

1) Check whether the TFT cable is in good contact;

2) If replacing the connecting cable still does not solve the problem, replace the TFT screen;

3) If the fault persists, replace the main control board.

► Detailed Photos

Tags： Mindray MEC1000 Patient Monitor Display 6091L-0391A, Display, LB104S 6091L-0391A,

Copyright statement:If not specified, the articles on this site are all PMR Med originals. Please indicate the source and attach the link to the Mindray MEC1000 Patient Monitor Parts Display Assembly LB104S 6091L-0391A article for reprinting.