Masimo 2016 LNC-10-GE SpO2 Sensor LNCS to GE Patient Cable 10ft/3m

Masimo 2016 LNC-10-GE Patient Cable 

Masimo 2016 LNC-10-GE SpO2 Sensor LNCS to GE Patient Cable 10ft/3m

► Brief Description

Masimo 2016 LNC-10-GE Patient Cable is a very important sensor used for SpO2 monitoring for patients. It has a length of 10 ft / 3 m and can be used in a variety of medical environments. The Masimo 2016 LNC-10-GE Patient Cable is a proven and proven solution for use with Masimo LNOP and LNCS sensors and GE Healthcare equipment with Masimo SET technology. It is a sensor device that meets the requirements of clinical medicine.

► Specification

► Precautions

Before using this Masimo 2016 LNC-10-GE Patient Cable, please make sure that the lead wires are visually intact with no broken or frayed wires or damaged parts. Visually inspect the cable and discard it if cracked or discolored.

Do not attempt to modify, refurbish, or reuse this Masimo 2016 LNC-10-GE Patient Cable, as doing so may damage electrical components and potentially present a patient hazard.

The Masimo 2016 LNC-10-GE Patient Cable is designed to be used with specific monitors. Before use, monitor, lead wires, and sensors should be checked for compatibility, failure to do so could result in reduced performance and/or patient injury.

► Detailed Photos

Thanks for your time, if you are interested in Masimo 2016 LNC-10-GE SpO2 Sensor LNCS to GE Patient Cable 10ft/3m, or have any suggestions for us, please feel free to contact us. We will reply you within 12 hours, wish you a happy life.

Tags： Masimo LNC-10-GE SpO2 Sensor 2016, SpO2 Sensor, LNC-10-GE,

Copyright statement:If not specified, the articles on this site are all PMR Med originals. Please indicate the source and attach the link to the Masimo 2016 LNC-10-GE SpO2 Sensor LNCS to GE Patient Cable 10ft/3m article for reprinting.